ContractBoard of Water Supply, 1915 |
Dentro del libro
Resultados 1-5 de 88
Página 16
... center month following the service of such notice . No evention of time will be made for ordinary delays or woodents , and the occurrence of such will not relieve the Con- tractor from the necessity of completing the structures within ...
... center month following the service of such notice . No evention of time will be made for ordinary delays or woodents , and the occurrence of such will not relieve the Con- tractor from the necessity of completing the structures within ...
Página 60
... center and tapering to thin edges , shall be made on clean glass plates and kept in moist air for a period of 24 hours . The pats are then to be treated and observed as follows : ( a ) A pat is to be kept in air at normal temperature ...
... center and tapering to thin edges , shall be made on clean glass plates and kept in moist air for a period of 24 hours . The pats are then to be treated and observed as follows : ( a ) A pat is to be kept in air at normal temperature ...
Página 63
... centers . securely braced and posted so as to prevent deflection and to withstand puddling and ramming . In order to permit easy re- moval , forms shall be coated with soap or other approved lubri- cant , not oil or grease , which will ...
... centers . securely braced and posted so as to prevent deflection and to withstand puddling and ramming . In order to permit easy re- moval , forms shall be coated with soap or other approved lubri- cant , not oil or grease , which will ...
Página 66
... center load of 1,000 pounds . Test cylinders 8 inches in diameter , 16 inches long , not less than 28 days old , shall support when dry , without cracking , a compressive load of 2,500 pounds per square inch , each specimen being ...
... center load of 1,000 pounds . Test cylinders 8 inches in diameter , 16 inches long , not less than 28 days old , shall support when dry , without cracking , a compressive load of 2,500 pounds per square inch , each specimen being ...
Página 73
... center of the rivet shall not be less than 114 inches and shall , where possible , be at least twice the diameter of the rivet . Rivets shall have full heads of standard hemispherical shape of full size and concentric with the shank ...
... center of the rivet shall not be less than 114 inches and shall , where possible , be at least twice the diameter of the rivet . Rivets shall have full heads of standard hemispherical shape of full size and concentric with the shank ...
Otras ediciones - Ver todas
Términos y frases comunes
acceptance amount approved Ashokan reservoir B&S gage Base Plug Receptacle Board of Water bolts brazing brick bronze building Catskill aqueduct cent Center line Certificate of acknowledg Chapter 724 Chief Eng Chief Engineer CITY TUNNEL complete concrete concrete-stone Condulets Contractor copper corporate seal County crane Croton Lake damages delivered Dept Eng Hdqrs dollars Drainage chamber estimate executed the foregoing File Cont foregoing instrument Galvanized Steel gate-valves grout Hill View inch installed Item Junction Box Kensico Kensico dam known and known labor lamp Laws lighting liquidated damages lump sum materials moneys necessary paid payment performance personally known pipe plates price stipulated Purlin quantities roof sash SECT SECTION A-A Shaft SHEETS IN SET Silver Lake Snap Switch specifications stone substructure surety surface therein thereof thereto tractor TRUSS valve Volt WATER SUPPLY CATSKILL Westchester county White Portland cement York BOARD York City
Pasajes populares
Página 29 - ... no laborer, workman or mechanic in the employ of the contractor, sub-contractor or other person doing or contracting to do the whole or a part of the work contemplated by the contract shall be permitted or required to work more than eight hours in any one calendar day, except in cases of extraordinary emergency caused by fire, flood or danger to life or property.
Página 39 - Each contract for such public work hereafter made shall contain a provision that the same shall be void and of no effect unless the person or corporation making or performing the same shall comply with the provisions of this...
Página 33 - ... in all cases decide every question which may arise relative to the fulfillment of this contract on the part of the Contractor.
Página 40 - Now, Therefore, the condition of the above obligation is such, that if the said shall well and truly, and in a good, sufficient and workmanlike manner, perform the...
Página 4 - On this day of , 10 — , before me personally came to me known and known to me to be the same person described in and who executed the foregoing instrument, and be acknowledged to me that he executed the same for the purposes therein mentioned.
Página 72 - ... orders will be given by the Engineer, and shall be received and obeyed by the superintendent or foreman who may have charge of the particular work in reference to which the orders are given.
Página 71 - Wherever in the specifications or upon the drawings the words directed, required, ordered, designated, prescribed, or words of like import are used, it shall be understood that the direction, requirement, order, designation, or prescription, of the Contracting Officer is intended and similarly the words approved, acceptable, satisfactory...
Página 33 - Is intended and similarly the words approved, acceptable, satisfactory, or words of like import shall mean approved by, or acceptable to, or satisfactory to the Contracting Officer, unless otherwise expressly stated.
Página 62 - Contractor, and in case any question shall arise between the parties hereto, touching this contract, such estimate and decision shall be a condition precedent to the right of the Contractor to receive any money under this contract.